diff --git a/library/roles/postfix/defaults/main.yml b/library/roles/postfix/defaults/main.yml new file mode 100644 index 00000000..6be57d92 --- /dev/null +++ b/library/roles/postfix/defaults/main.yml @@ -0,0 +1,120 @@ +--- +postfix_enabled: True +postfix_install_packages: True + +postfix_relay_rh_pkgs: + - postfix + - cyrus-sasl-lib + - cyrus-sasl-plain + - cyrus-sasl-md5 + +postfix_relay_deb_pkgs: + - postfix + - libsasl2-2 + +############################################################################# +# Set them to true when you want configure your machine to send email to a relay +############################################################################# +postfix_relay_client: False +postfix_use_relay_host: '{{ postfix_relay_client }}' +postfix_biff: "no" +postfix_append_dot_mydomain: "no" + +postfix_use_letsencrypt: False +# Accepted values: none, may, encrypt +postfix_smtpd_tls_security_level: encrypt +# Accepted values: none, may, encrypt, fingerprint, verify, secure. And from 2.11: dane, dane-only +postfix_smtp_tls_security_level: encrypt +postfix_use_sasl_auth: True +postfix_smtp_sasl_auth_enable: "yes" +postfix_smtp_create_relay_user: True +# Options: noanonymous, noplaintext +postfix_smtp_sasl_security_options: noanonymous +postfix_smtp_sasl_tls_security_options: '{{ postfix_smtp_sasl_security_options }}' +postfix_smtp_sasl_mechanism_filter: plain, login + +# Set it in your vars files +#postfix_relay_host: smtp-relay.example.com +postfix_relay_port: 587 +#postfix_smtp_relay_user: smtp-user +postfix_smtp_relay_user: '{{ ansible_fqdn }}' +# This one has to be set inside a vault file +#postfix_smtp_relay_pwd: 'set_you_password_here_in_a_vault_encrypted_file' + +############################################################################# +# Relay server: accept authenticated clients +############################################################################# +postfix_relay_server: False +############################################################################# +# SMTP server that not accept authenticated clients. +############################################################################# +postfix_smtpd_server: False +########################################################################################### +# The following options are used when acting as a relay or as a general purpose SMTP server +########################################################################################### +postfix_use_inet_interfaces: False +postfix_inet_interfaces: + - all +postfix_inet_protocols: + - all +postfix_proxy_interfaces_enabled: False +postfix_proxy_interfaces: + - 127.0.0.1 +postfix_message_size_limit: 10240000 + +postfix_sasl_deb_packages: + - sasl2-bin + +postfix_sasl_rh_packages: + - cyrus-sasl + +postfix_use_domain_name: False +postfix_inet_lmtp_enabled: False +postfix_inet_lmtp_host: '127.0.0.1' +postfix_inet_lmtp_port: 24 +postfix_delivery_soft_bounce: False +postfix_recipient_delimiter: '+' +postfix_local_recipients: False + +postfix_mynetworks: hash:/etc/postfix/network_table +postfix_mynetworks_data: + - '127.0.0.0/8' + - '127.0.0.1' + +postfix_alias_maps: + - 'hash:/etc/aliases' + +postfix_alias_databases: '{{ postfix_alias_maps }}' + +postfix_virtual_addresses: False +postfix_virtual_mailbox_domains: 'hash:/etc/postfix/virtual_domains' +postfix_virtual_mailbox_maps: + - 'hash:/etc/postfix/vmailbox_maps' + +postfix_virtual_alias_maps: + - 'hash:/etc/postfix/virtual' + +postfix_local_dest_concurrency_limit: 2 +postfix_default_destination_concurrency_limit: 5 + +postfix_behind_haproxy: False +postfix_postscreen_port: 1024 + +# +# Nagios monitoring +# +postfix_nagios_check: False +postfix_nagios_checks: + - check_postfix_mailqueue + - check_postfix_processed + +nagios_postfix_mailq_w: 20 +nagios_postfix_mailq_c: 50 +nagios_postfix_processed_w: 50 +nagios_postfix_processed_c: 150 + +postfix_firewalld_services: + - { service: 'smtp', state: 'enabled', zone: '{{ firewalld_default_zone }}' } + - { service: 'smtps', state: 'enabled', zone: '{{ firewalld_default_zone }}' } + - { service: 'smtp-submission', state: 'enabled', zone: '{{ firewalld_default_zone }}' } + diff --git a/library/roles/postfix/files/check_postfix_mailqueue b/library/roles/postfix/files/check_postfix_mailqueue new file mode 100644 index 00000000..98721b5c --- /dev/null +++ b/library/roles/postfix/files/check_postfix_mailqueue @@ -0,0 +1,181 @@ +#!/bin/bash +################################################################### +# check_postfix_mailqueue is developped with GPL Licence 2.0 +# +# GPL License: http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt +# +# First version developped by : Bjoern Bongermino +# +################################################################### +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +#################################################################### + +# +# original https://gist.github.com/alexlehm/8084195 +# + +# created by McArt http://www.mcart.ru/ + +# Uncomment to enable debugging +# set -x + +PROGNAME=`basename $0` +VERSION="Version 2.0" +AUTHOR="McArt (http://www.mcart.ru)" + +STATE_OK=0 +STATE_WARNING=1 +STATE_CRITICAL=2 +STATE_UNKNOWN=3 + +warning=unknown +critical=unknown + +print_version() { + echo "$PROGNAME $VERSION $AUTHOR" +} + +print_help() { + print_version $PROGNAME $VERSION + echo "" + echo "$PROGNAME - Checks postfix mailqueue statistic" + echo "" + echo "$PROGNAME is a Nagios plugin which generates statistics" + echo "for the postfix mailqueue and checks for corrupt messages." + echo "The following values will be checked:" + echo "active: Mails being delivered (should be small)" + echo "deferred: Stuck mails (that will be retried later)" + echo "corrupt: Messages found to not be in correct format (should be 0)" + echo "hold: Recent addition, messages put on hold indefinitly - delete of free" + echo "bounced: Bounced mails" + echo "" + echo "Usage: $PROGNAME -w WARN-Level -c CRIT-Level" + echo "" + echo "Options:" + echo " -w)" + echo " Warning level for active mails" + echo " -c)" + echo " Critical level for active mail" + echo " -h)" + echo " This help" + echo " -v)" + echo " Version" + exit $STATE_OK +} + +# Check for parameters +while test -n "$1"; do + case "$1" in + -h) + print_help + exit $STATE_OK;; + -v) + print_version + exit $STATE_OK;; + -w) + warning=$2 + shift + ;; + -c) + critical=$2 + shift + ;; + *) + echo "Usage: ./check_postfix_mailqueue2.sh -w -c " + ;; + esac + shift +done + +if [ $warning == "unknown" ] || [ $critical == "unknown" ]; then + echo "You need to specify warning and critical for active mails" + echo "Usage: ./check_postfix_mailqueue2.sh -w -c " + exit $STATE_UNKNOWN +fi + +# make sure CRIT is larger than WARN +if [ $warning -ge $critical ];then + echo "UNKNOWN: WARN value may not be greater than or equal the CRIT value" + exit $OK +fi + +check_postfix_mailqueue() { +# Can be set via environment, but default is fetched by postconf (if available, +# else /var/spool/postfix) +if which postconf > /dev/null ; then + SPOOLDIR=${spooldir:-`postconf -h queue_directory`} +else + SPOOLDIR=${spooldir:-/var/spool/postfix} +fi + +cd $SPOOLDIR >/dev/null 2>/dev/null || { + echo -n "Cannot cd to $SPOOLDIR" + exit $STATE_CRITICAL +} + +for d in deferred active corrupt hold +do + if [ ! -r $d ] + then + echo -n "queue dir '$d' is not readable" + exit $STATE_CRITICAL + fi +done + +# Get values +deferred=`(test -d deferred && find deferred -type f ) | wc -l` +active=`(test -d active && find active -type f ) | wc -l` +corrupt=`(test -d corrupt && find corrupt -type f ) | wc -l` +hold=`( test -d hold && find hold -type f ) | wc -l` +bounced=`cat /var/log/mail.log | grep bounced | wc -l` +} + +check_postfix_mailqueue +values="Deferred mails=$deferred Active deliveries=$active Corrupt mails=$corrupt Mails on hold=$hold Bounced mails=$bounced" +perfdata="deferred=$deferred;; active=$active;; corrupt=$corrupt;; hold=$hold;; bounced=$bounced;;" + +if [ $corrupt -gt 0 ]; then + echo -n "Postfix Mailqueue WARNING - $corrupt corrupt messages found! | $perfdata" + exit $STATE_WARNING +fi + +if [ $hold -gt 0 ]; then + echo -n "Postfix Mailqueue WARNING - $hold hold messages found! | $perfdata" + exit $STATE_WARNING +fi + +if [ $deferred -gt 0 ]; then + echo -n "Postfix Mailqueue WARNING - $deferred deferred messages found! | $perfdata" + exit $STATE_WARNING +fi + +if [ $bounced -gt 0 ]; then + echo -n "Postfix Mailqueue WARNING - $bounced bounced messages found! | $perfdata" + exit $STATE_WARNING +fi + + + if [ $active -gt $critical ]; then + MES_TO_EXIT="Postfix Mailqueue CRITICAL - $values | $perfdata" + STATE_TO_EXIT=$STATE_CRITICAL + elif [ $active -gt $warning ]; then + MES_TO_EXIT="Postfix Mailqueue WARNING - $values | $perfdata" + STATE_TO_EXIT=$STATE_WARNING + else + MES_TO_EXIT="Postfix Mailqueue OK - $values | $perfdata" + STATE_TO_EXIT=$STATE_OK + fi + + +echo -n $MES_TO_EXIT +echo -e "\n" +exit $STATE_TO_EXIT diff --git a/library/roles/postfix/files/check_postfix_processed b/library/roles/postfix/files/check_postfix_processed new file mode 100755 index 00000000..1dd64219 --- /dev/null +++ b/library/roles/postfix/files/check_postfix_processed @@ -0,0 +1,104 @@ +#!/usr/bin/env bash + +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# =============== +# check_postfixprocessed - plugin to check the number of mail processed by parsing logfiles +# =============== +# * mail processor written by Cecil Westerhof & Modifications for nagios by Frank IJskes +# * Christian Nutz identified the IF as slow on large logfiles, by only checking from the bottom up performance went back to normal + +# version 2 uses AWK to improve processing / lower cpu load +# plugin return codes: +# 0 OK +# 1 Warning +# 2 Critical +# 3 Unknown + +NO_OF_SECONDS=300 +POSTFIX_LOG="/var/log/mail.log" + +while getopts "hvw:c:" opt +do + case $opt in + h) + showhelp=1 + break + ;; + w) + warning="$OPTARG" + ;; + c) + critical="$OPTARG" + ;; + v) + verbose=1 + ;; + esac +done + +printUsage() { + echo "Usage: $0 [-h] [-v] -w -c " + echo "" + echo "Example: $0 -w 50 -c 100" +} + +printHelp() { + printUsage + echo "" + echo "This plugin checks the number of messages processed by Postfix in the last 5 minutes." + echo "" + echo "For more details, see inside the script ;)" + echo "" + exit 3 +} + +if [ "$showhelp" = "1" ]; then + printHelp + exit 3 +fi + +if [ ! "$warning" ] || [ ! "$critical" ]; then + printUsage + exit 3 +fi + +if [ $warning -ge $critical ]; then + echo " has to be smaller than !" + exit 3 +fi + +if [ ! "$POSTFIX_LOG" ]; then + echo "Could not find postfix log!" + exit 3 +fi + +countSentMessages () { + NOW=`date +%s` + + DATE_FROM=`awk -v now=$NOW -v seconds=$NO_OF_SECONDS 'BEGIN{print strftime("%b %d %T", now-seconds)}'` + DATE_TO=`awk -v now=$NOW 'BEGIN{print strftime("%b %d %T", now)}'` + + echo `awk '$0>=from && $0<=to' from="$DATE_FROM" to="$DATE_TO" ${POSTFIX_LOG} | grep ' postfix/smtp\[.*, status=sent ' | wc -l` +} + +sentMessagesCount=`countSentMessages` + +echo "Messages processed in the last $NO_OF_SECONDS seconds: $sentMessagesCount | mailsprocessed=$sentMessagesCount" + +if [ "$sentMessagesCount" -ge "$critical" ]; then + exit 2 +elif [ "$sentMessagesCount" -ge "$warning" ]; then + exit 1 +else + exit 0 +fi diff --git a/library/roles/postfix/files/sasl_smtpd.conf b/library/roles/postfix/files/sasl_smtpd.conf new file mode 100644 index 00000000..1216a465 --- /dev/null +++ b/library/roles/postfix/files/sasl_smtpd.conf @@ -0,0 +1,3 @@ +pwcheck_method: saslauthd +mech_list: PLAIN LOGIN + diff --git a/library/roles/postfix/handlers/main.yml b/library/roles/postfix/handlers/main.yml new file mode 100644 index 00000000..62e759fe --- /dev/null +++ b/library/roles/postfix/handlers/main.yml @@ -0,0 +1,21 @@ +- name: Update SASL hash + shell: postmap hash:/etc/postfix/sasl_passwd + +- name: Reload postfix + service: name=postfix state=reloaded + when: postfix_enabled | bool + +- name: Restart postfix + service: name=postfix state=restarted + when: postfix_enabled | bool + +- name: Update the network hash table + shell: postmap hash:/etc/postfix/network_table + +- name: start saslauth daemon + service: name=saslauthd state=started enabled=yes + when: postfix_enabled | bool + +- name: restart saslauth daemon + service: name=saslauthd state=restarted + when: postfix_enabled | bool diff --git a/library/roles/postfix/tasks/main.yml b/library/roles/postfix/tasks/main.yml new file mode 100644 index 00000000..b1969d74 --- /dev/null +++ b/library/roles/postfix/tasks/main.yml @@ -0,0 +1,13 @@ +--- +- import_tasks: smtp-common-packages.yml +- import_tasks: postfix_firewalld.yml + when: ansible_distribution_file_variety == "RedHat" +- import_tasks: smtp-sasl-auth.yml + when: + - postfix_use_sasl_auth | bool + - postfix_relay_client | bool +- import_tasks: postfix-relay-server.yml + when: postfix_relay_server | bool +- import_tasks: postfix-letsencrypt-hook.yml + when: postfix_use_letsencrypt | bool + diff --git a/library/roles/postfix/tasks/postfix-letsencrypt-hook.yml b/library/roles/postfix/tasks/postfix-letsencrypt-hook.yml new file mode 100644 index 00000000..5d67e52b --- /dev/null +++ b/library/roles/postfix/tasks/postfix-letsencrypt-hook.yml @@ -0,0 +1,8 @@ +--- +- name: Create the acme hooks directory if it does not exist + file: dest=/usr/lib/acme/hooks/postfix state=directory + tags: [ 'postfix', 'postfix-relay', 'letsencrypt' ] + +- name: Install a hook for letsencrypt + template: src=postfix-letsencrypt-hook dest=/usr/lib/acme/hooks/postfix owner=root group=root mode=4555 + tags: [ 'postfix', 'postfix-relay', 'letsencrypt' ] diff --git a/library/roles/postfix/tasks/postfix-relay-server.yml b/library/roles/postfix/tasks/postfix-relay-server.yml new file mode 100644 index 00000000..338cc830 --- /dev/null +++ b/library/roles/postfix/tasks/postfix-relay-server.yml @@ -0,0 +1,46 @@ +--- +- name: Postfix relay, deb specific + block: + - name: Install the sasl2 authentication infrastructure + apt: pkg={{ postfix_sasl_deb_packages }} state=present cache_valid_time=1800 + when: ansible_distribution_file_variety == "Debian" + + - name: Create the sasl run directory inside /var/spool/postfix, for chroot + file: dest=/var/spool/postfix/var/run/saslauthd state=directory owner=root group=root mode=0555 + notify: start saslauth daemon + + - name: Change the socket path because postfix on debian runs inside a chroot jail + action: configfile path=/etc/default/saslauthd key=OPTIONS value='"-c -m /var/spool/postfix/var/run/saslauthd"' syntax=shell + notify: restart saslauth daemon + + - name: Enable the saslauth daemon + action: configfile path=/etc/default/saslauthd key=START value='yes' syntax=shell + + tags: [ 'postfix_relay', 'postfix-relay' ] + +- name: Postfix relay, rh specific + block: + - name: Install the sasl2 authentication infrastructure + yum: pkg={{ postfix_sasl_rh_packages }} state=present + when: ansible_distribution_file_variety == "RedHat" + + tags: [ 'postfix_relay', 'postfix-relay' ] + + +- name: Postfix relay + block: + - name: Create the sasl directory inside /etc/postfix + file: dest=/etc/postfix/sasl state=directory owner=root group=root mode=0555 + + - name: Install the smtpd.conf file inside inside /etc/postfix/sasl + copy: src=sasl_smtpd.conf dest=/etc/postfix/sasl/smtpd.conf owner=root group=root mode=0444 + + - name: Assign the sasl group to the postfix user so that postfix can use the saslauthd socket + user: name=postfix groups='sasl' + notify: Restart postfix + + - name: Ensure that the saslauthd daemon is started and enabled + service: name=saslauthd state=restarted enabled=yes + + tags: [ 'postfix_relay', 'postfix-relay' ] + diff --git a/library/roles/postfix/tasks/postfix_firewalld.yml b/library/roles/postfix/tasks/postfix_firewalld.yml new file mode 100644 index 00000000..84d923d1 --- /dev/null +++ b/library/roles/postfix/tasks/postfix_firewalld.yml @@ -0,0 +1,8 @@ +--- +- name: Manage the postfix firewalld rules + block: + - name: Manage the postfix related services + firewalld: service={{ item.service }} zone={{ item.zone }} permanent={{ item.permanent | default(True) }} state={{ item.state }} immediate=True + with_items: '{{ postfix_firewalld_services }}' + + tags: [ 'postfix', 'firewall', 'firewalld', 'iptables', 'iptables_rules' ] \ No newline at end of file diff --git a/library/roles/postfix/tasks/smtp-common-packages.yml b/library/roles/postfix/tasks/smtp-common-packages.yml new file mode 100644 index 00000000..90c6ede6 --- /dev/null +++ b/library/roles/postfix/tasks/smtp-common-packages.yml @@ -0,0 +1,81 @@ +--- +- block: + - name: Install postfix and libsas to do mail relay on deb systems + apt: pkg={{ postfix_relay_deb_pkgs }} state=present update_cache=yes cache_valid_time=1800 + when: ansible_distribution_file_variety == "Debian" + + - name: Install postfix and libsas to do mail relay on RH systems + yum: pkg={{ postfix_relay_rh_pkgs }} state=present + when: ansible_distribution_file_variety == "RedHat" + + - name: Remove the ssmtp package on RH systems + yum: pkg=ssmtp state=absent + when: ansible_distribution_file_variety == "RedHat" + + - name: Write the postfix main configuration file + template: src=main.cf.j2 dest=/etc/postfix/main.cf owner=root group=root mode=0444 + register: postfix_main_restart_needed + + - name: The postfix master.cf file adapts to the service role + template: src=master.cf.j2 dest=/etc/postfix/master.cf owner=root group=root mode=0444 + register: postfix_master_restart_needed + + - name: Write the postfix network_table map + template: src=network_table.j2 dest=/etc/postfix/network_table owner=root group=root mode=0444 + register: postfix_network_table_status + + when: postfix_install_packages | bool + tags: postfix + +- block: + - name: Ensure that postfix is started and enabled + service: name=postfix state=started enabled=yes + + - name: Update the network hash table + shell: postmap hash:/etc/postfix/network_table + when: postfix_network_table_status is changed + + - name: Restart postfix + service: name=postfix state=restarted + when: ( postfix_main_restart_needed is changed ) or ( postfix_master_restart_needed is changed ) + + when: + - postfix_install_packages | bool + - postfix_enabled | bool + tags: postfix + +- block: + - name: Ensure that postfix is stopped and disabled + service: name=postfix state=stopped enabled=no + + when: + - postfix_install_packages | bool + - not postfix_enabled | bool + tags: postfix + + +- block: + - name: Install the postfix NRPE nagios check + copy: src={{ item }} dest={{ nagios_plugins_dir }}/{{ item }} owner=root group=nagios mode=0555 + with_items: '{{ postfix_nagios_checks }}' + + - name: Install the postfix NRPE command configuration + template: src=postfix-nrpe.cfg.j2 dest={{ nrpe_include_dir }}/postfix-nrpe.cfg owner=root group=root mode=0444 + notify: Reload NRPE server + + when: + - postfix_install_packages | bool + - postfix_nagios_check | bool + tags: [ 'postfix', 'nagios', 'nrpe' ] + +- block: + - name: Remove postfix and libsas on deb systems + action: apt pkg={{ postfix_relay_deb_pkgs }} state=absent + when: ansible_distribution_file_variety == "Debian" + + - name: Remove postfix and libsas to do mail relay on RH systems + yum: pkg={{ postfix_relay_rh_pkgs }} state=absent + when: ansible_distribution_file_variety == "RedHat" + + when: not postfix_install_packages | bool + tags: postfix diff --git a/library/roles/postfix/tasks/smtp-sasl-auth.yml b/library/roles/postfix/tasks/smtp-sasl-auth.yml new file mode 100644 index 00000000..bc4f2a2e --- /dev/null +++ b/library/roles/postfix/tasks/smtp-sasl-auth.yml @@ -0,0 +1,11 @@ +--- +- name: Write sasl hash file + template: src=sasl_passwd.j2 dest=/etc/postfix/sasl_passwd owner=root group=root mode=0400 + when: postfix_use_sasl_auth + register: update_sasl_hash + tags: postfix-relay + +- name: Update SASL hash + shell: postmap hash:/etc/postfix/sasl_passwd + when: update_sasl_hash is changed + tags: postfix-relay diff --git a/library/roles/postfix/templates/main.cf.explained.j2 b/library/roles/postfix/templates/main.cf.explained.j2 new file mode 100644 index 00000000..5b751e57 --- /dev/null +++ b/library/roles/postfix/templates/main.cf.explained.j2 @@ -0,0 +1,694 @@ +{% if postfix_delivery_soft_bounce %} +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +soft_bounce = yes +{% else %} +soft_bounce = no +{% endif %} + +queue_directory = /var/spool/postfix +command_directory = /usr/sbin +daemon_directory = /usr/libexec/postfix +data_directory = /var/lib/postfix +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +myhostname = {{ ansible_fqdn }} +{% if postfix_use_domain_name is defined %} +{% elif domain_name is defined %} +mydomain = {{ domain_name }} +{% else %} +mydomain = {{ ansible_fqdn }} +{% endif %} +{% endif %} + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +{% if domain_name is defined %} +myorigin = {{ domain_name }} +{% else %} +myorigin = {{ ansible_fqdn }} +{% endif %} + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +{% if not postfix_use_inet_interfaces %} +{% if not postfix_relay_server %} +inet_interfaces = localhost +inet_protocols = ipv4 +{% else %} +inet_interfaces = {% for int in postfix_inet_interfaces %}{{ int }}{% if not loop.end%}, {% endif %}{% endfor %} +inet_protocols = {% for proto in postfix_inet_protocols %}{{ proto }}{% if not loop.end%}, {% endif %}{% endfor %} +{% endif %} +{% endif %} + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 +{% if postfix_proxy_interfaces_enabled %} +proxy_interfaces = {% for proxy_int in postfix_proxy_interfaces %}{{ proxy_int }} {% endfor %} +{% endif %} + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +{% if postfix_use_domain_name is defined %} +{% elif domain_name is defined %} +mydestination = {{ ansible_fqdn }}, localhost, {{ domain_name }} +{% else %} +mydestination = {{ ansible_fqdn }}, localhost +{% endif %} +{% endif %} + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +{% if not postfix_local_recipients %} +local_recipient_maps = +{% endif %} + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +{% if postfix_delivery_soft_bounce %} +unknown_local_recipient_reject_code = 450 +{% else %} +unknown_local_recipient_reject_code = 550 +{% endif %} +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +{% if not postfix_use_inet_interfaces %} +mynetworks = 127.0.0.0/8 +{% else %} +mynetworks = {{ postfix_mynetworks }} +{% endif %} + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +{% if postfix_use_relay_host %} +relayhost = {{ postfix_relay_host }}:{{ postfix_relay_port }} +{% endif %} + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +alias_maps = {% for alias in postfix_alias_maps %}{{ alias }}{% if not loop.end%}, {% endif %}{% endfor %} + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +alias_database = {% for dbalias in postfix_alias_databases %}{{ dbalias }}{% if not loop.end%}, {% endif %}{% endfor %} + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +recipient_delimiter = {{ postfix_recipient_delimiter }} + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp + +# If using the cyrus-imapd IMAP server deliver local mail to the IMAP +# server using LMTP (Local Mail Transport Protocol), this is prefered +# over the older cyrus deliver program by setting the +# mailbox_transport as below: +# +# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp +# +# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via +# these settings. +# +# local_destination_recipient_limit = 300 +# local_destination_concurrency_limit = 5 +# +# Of course you should adjust these settings as appropriate for the +# capacity of the hardware you are using. The recipient limit setting +# can be used to take advantage of the single instance message store +# capability of Cyrus. The concurrency limit can be used to control +# how many simultaneous LMTP sessions will be permitted to the Cyrus +# message store. +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp +#fallback_transport = +{% if postfix_inet_lmtp_enabled %} +virtual_transport = lmtp:inet:{{ postfix_inet_lmtp_host }}:{{ postfix_inet_lmtp_port }} +{% endif %} + +{% if postfix_virtual_addresses %} +virtual_mailbox_domains = {{ postfix_virtual_mailbox_domains }} +virtual_mailbox_maps = {% for mbmap in postfix_virtual_mailbox_maps %}{{ mbmap }} {% endfor %} +virtual_alias_maps = {% for mbmap in postfix_virtual_alias_maps %}{{ mbmap }} {% endfor %} +{% endif %} + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# +# UCE/RBL +# +disable_vrfy_command = yes +smtpd_delay_reject = yes +smtpd_helo_required = yes + +{% if postfix_smtpd_server %} +smtpd_client_restrictions = + permit_mynetworks + permit_inet_interfaces +{% endif %} + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) +smtpd_banner = $myhostname ESMTP $mail_name + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +local_destination_concurrency_limit = {{ postfix_local_dest_concurrency_limit }} +default_destination_concurrency_limit = {{ postfix_default_destination_concurrency_limit }} + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +#debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin +# ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail.postfix + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases.postfix + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq.postfix + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = no + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# readme_directory: The location of the Postfix README files. +# +readme_directory = no + +# TLS parameters +# Server +{% if letsencrypt_acme_install is defined %} +{% if postfix_use_letsencrypt %} +smtpd_tls_cert_file={{ letsencrypt_acme_certs_dir }}/cert +smtpd_tls_key_file={{ letsencrypt_acme_certs_dir }}/privkey +{% else %} +smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem +smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key +{% endif %} +{% endif %} +{% if letsencrypt_acme_install is not defined %} +smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem +smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key +{% endif %} +smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache +{% if postfix_smtpd_server %} +smtpd_tls_security_level = encrypt +smtpd_tls_auth_only = yes +{% endif %} +smtpd_tls_security_level={{ postfix_smtpd_tls_security_level }} +# Client +smtp_tls_security_level = {{ postfix_smtp_tls_security_level }} +smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache diff --git a/library/roles/postfix/templates/main.cf.j2 b/library/roles/postfix/templates/main.cf.j2 new file mode 100644 index 00000000..2171554d --- /dev/null +++ b/library/roles/postfix/templates/main.cf.j2 @@ -0,0 +1,701 @@ +{% if postfix_delivery_soft_bounce %} +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +soft_bounce = yes +{% else %} +soft_bounce = no +{% endif %} + +queue_directory = /var/spool/postfix +command_directory = /usr/sbin +daemon_directory = /usr/libexec/postfix +data_directory = /var/lib/postfix +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +myhostname = {{ ansible_fqdn }} +{% if postfix_use_domain_name is defined %} +{% elif domain_name is defined %} +mydomain = {{ domain_name }} +{% else %} +mydomain = {{ ansible_fqdn }} +{% endif %} + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +{% if domain_name is defined %} +myorigin = {{ domain_name }} +{% else %} +myorigin = {{ ansible_fqdn }} +{% endif %} + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +{% if not postfix_use_inet_interfaces %} +{% if not postfix_relay_server %} +inet_interfaces = localhost +inet_protocols = ipv4 +{% else %} +inet_interfaces = {% for int in postfix_inet_interfaces %}{{ int }}{% if not loop.last %}, {% endif %}{% endfor %} +inet_protocols = {% for proto in postfix_inet_protocols %}{{ proto }}{% if not loop.last %}, {% endif %}{% endfor %} +{% endif %} +{% endif %} + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 +{% if postfix_proxy_interfaces_enabled %} +proxy_interfaces = {% for proxy_int in postfix_proxy_interfaces %}{{ proxy_int }} {% endfor %} +{% endif %} + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +{% if postfix_use_domain_name is defined %} +{% elif domain_name is defined %} +mydestination = {{ ansible_fqdn }}, localhost, {{ domain_name }} +{% else %} +mydestination = {{ ansible_fqdn }}, localhost +{% endif %} + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +{% if not postfix_local_recipients %} +local_recipient_maps = +{% endif %} + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +{% if postfix_delivery_soft_bounce %} +unknown_local_recipient_reject_code = 450 +{% else %} +unknown_local_recipient_reject_code = 550 +{% endif %} +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +{% if not postfix_use_inet_interfaces %} +mynetworks = 127.0.0.0/8 +{% else %} +mynetworks = {{ postfix_mynetworks }} +{% endif %} + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +{% if postfix_use_relay_host %} +relayhost = {{ postfix_relay_host }}:{{ postfix_relay_port }} +{% endif %} + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +alias_maps = {% for alias in postfix_alias_maps %}{{ alias }}{% if not loop.last %}, {% endif %}{% endfor %} + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +alias_database = {% for dbalias in postfix_alias_databases %}{{ dbalias }}{% if not loop.last %}, {% endif %}{% endfor %} + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +recipient_delimiter = {{ postfix_recipient_delimiter }} + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp + +# If using the cyrus-imapd IMAP server deliver local mail to the IMAP +# server using LMTP (Local Mail Transport Protocol), this is prefered +# over the older cyrus deliver program by setting the +# mailbox_transport as below: +# +# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp +# +# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via +# these settings. +# +# local_destination_recipient_limit = 300 +# local_destination_concurrency_limit = 5 +# +# Of course you should adjust these settings as appropriate for the +# capacity of the hardware you are using. The recipient limit setting +# can be used to take advantage of the single instance message store +# capability of Cyrus. The concurrency limit can be used to control +# how many simultaneous LMTP sessions will be permitted to the Cyrus +# message store. +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp +#fallback_transport = +{% if postfix_inet_lmtp_enabled %} +virtual_transport = lmtp:inet:{{ postfix_inet_lmtp_host }}:{{ postfix_inet_lmtp_port }} +{% endif %} + +{% if postfix_virtual_addresses %} +virtual_mailbox_domains = {{ postfix_virtual_mailbox_domains }} +virtual_mailbox_maps = {% for mbmap in postfix_virtual_mailbox_maps %}{{ mbmap }} {% endfor %} + +virtual_alias_maps = {% for mbmap in postfix_virtual_alias_maps %}{{ mbmap }} {% endfor %} +{% endif %} + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# +# UCE/RBL +# +disable_vrfy_command = yes +smtpd_delay_reject = yes +smtpd_helo_required = yes + +{% if postfix_smtpd_server %} +smtpd_client_restrictions = + permit_mynetworks + permit_inet_interfaces +{% endif %} + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) +smtpd_banner = $myhostname ESMTP $mail_name + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +local_destination_concurrency_limit = {{ postfix_local_dest_concurrency_limit }} +default_destination_concurrency_limit = {{ postfix_default_destination_concurrency_limit }} + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +#debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin +# ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail.postfix + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases.postfix + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq.postfix + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = no + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# readme_directory: The location of the Postfix README files. +# +readme_directory = no + +# TLS parameters +# Server +{% if letsencrypt_acme_install is defined %} +{% if postfix_use_letsencrypt %} +smtpd_tls_cert_file={{ letsencrypt_acme_certs_dir }}/cert +smtpd_tls_key_file={{ letsencrypt_acme_certs_dir }}/privkey +{% else %} +smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem +smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key +{% endif %} +{% endif %} +{% if letsencrypt_acme_install is not defined %} +smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem +smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key +{% endif %} +smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache +{% if postfix_smtpd_server %} +smtpd_tls_security_level = {{ postfix_smtpd_tls_security_level }} +smtpd_tls_auth_only = yes +{% endif %} +smtpd_tls_security_level={{ postfix_smtpd_tls_security_level }} +# Client +smtp_tls_security_level = {{ postfix_smtp_tls_security_level }} +smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache + +# +# HAPROXY +# +{% if postfix_behind_haproxy %} +smtpd_upstream_proxy_protocol = haproxy +{% endif %} + diff --git a/library/roles/postfix/templates/master.cf.j2 b/library/roles/postfix/templates/master.cf.j2 new file mode 100644 index 00000000..7cdf38ac --- /dev/null +++ b/library/roles/postfix/templates/master.cf.j2 @@ -0,0 +1,127 @@ +# +# Postfix master process configuration file. For details on the format +# of the file, see the master(5) manual page (command: "man 5 master"). +# +# Do not forget to execute "postfix reload" after editing this file. +# +# ========================================================================== +# service type private unpriv chroot wakeup maxproc command + args +# (yes) (yes) (yes) (never) (100) +# ========================================================================== +smtp inet n - n - - smtpd +#smtp inet n - n - 1 postscreen +#smtpd pass - - n - - smtpd +#dnsblog unix - - n - 0 dnsblog +#tlsproxy unix - - n - 0 tlsproxy +#submission inet n - n - - smtpd +# -o syslog_name=postfix/submission +# -o smtpd_tls_security_level=encrypt +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_reject_unlisted_recipient=no +# -o smtpd_client_restrictions=$mua_client_restrictions +# -o smtpd_helo_restrictions=$mua_helo_restrictions +# -o smtpd_sender_restrictions=$mua_sender_restrictions +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +#smtps inet n - n - - smtpd +# -o syslog_name=postfix/smtps +# -o smtpd_tls_wrappermode=yes +# -o smtpd_sasl_auth_enable=yes +# -o smtpd_reject_unlisted_recipient=no +# -o smtpd_client_restrictions=$mua_client_restrictions +# -o smtpd_helo_restrictions=$mua_helo_restrictions +# -o smtpd_sender_restrictions=$mua_sender_restrictions +# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o milter_macro_daemon_name=ORIGINATING +#628 inet n - n - - qmqpd +pickup unix n - n 60 1 pickup +cleanup unix n - n - 0 cleanup +qmgr unix n - n 300 1 qmgr +#qmgr unix n - n 300 1 oqmgr +tlsmgr unix - - n 1000? 1 tlsmgr +rewrite unix - - n - - trivial-rewrite +bounce unix - - n - 0 bounce +defer unix - - n - 0 bounce +trace unix - - n - 0 bounce +verify unix - - n - 1 verify +flush unix n - n 1000? 0 flush +proxymap unix - - n - - proxymap +proxywrite unix - - n - 1 proxymap +smtp unix - - n - - smtp +relay unix - - n - - smtp +# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 +showq unix n - n - - showq +error unix - - n - - error +retry unix - - n - - error +discard unix - - n - - discard +local unix - n n - - local +virtual unix - n n - - virtual +lmtp unix - - - - - lmtp +anvil unix - - n - 1 anvil +scache unix - - n - 1 scache +# +# ==================================================================== +# Interfaces to non-Postfix software. Be sure to examine the manual +# pages of the non-Postfix software to find out what options it wants. +# +# Many of the following services use the Postfix pipe(8) delivery +# agent. See the pipe(8) man page for information about ${recipient} +# and other message envelope options. +# ==================================================================== +# +# maildrop. See the Postfix MAILDROP_README file for details. +# Also specify in main.cf: maildrop_destination_recipient_limit=1 +# +#maildrop unix - n n - - pipe +# flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} +# +# ==================================================================== +# +# Recent Cyrus versions can use the existing "lmtp" master.cf entry. +# +# Specify in cyrus.conf: +# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 +# +# Specify in main.cf one or more of the following: +# mailbox_transport = lmtp:inet:localhost +# virtual_transport = lmtp:inet:localhost +# +# ==================================================================== +# +# Cyrus 2.1.5 (Amos Gouaux) +# Also specify in main.cf: cyrus_destination_recipient_limit=1 +# +#cyrus unix - n n - - pipe +# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user} +# +# ==================================================================== +# +# Old example of delivery via Cyrus. +# +#old-cyrus unix - n n - - pipe +# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user} +# +# ==================================================================== +# +# See the Postfix UUCP_README file for configuration details. +# +#uucp unix - n n - - pipe +# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) +# +# ==================================================================== +# +# Other external delivery methods. +# +#ifmail unix - n n - - pipe +# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) +# +#bsmtp unix - n n - - pipe +# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient +# +#scalemail-backend unix - n n - 2 pipe +# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store +# ${nexthop} ${user} ${extension} +# +#mailman unix - n n - - pipe +# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py +# ${nexthop} ${user} diff --git a/library/roles/postfix/templates/network_table.j2 b/library/roles/postfix/templates/network_table.j2 new file mode 100644 index 00000000..355d1cba --- /dev/null +++ b/library/roles/postfix/templates/network_table.j2 @@ -0,0 +1,3 @@ +{% for net in postfix_mynetworks_data %} +{{ net }} OK +{% endfor %} diff --git a/library/roles/postfix/templates/postfix-letsencrypt-hook b/library/roles/postfix/templates/postfix-letsencrypt-hook new file mode 100644 index 00000000..c0a5a456 --- /dev/null +++ b/library/roles/postfix/templates/postfix-letsencrypt-hook @@ -0,0 +1,18 @@ +#!/bin/bash + +LE_LOG_DIR=/var/log/acme +DATE=$( date ) + +[ ! -d $LE_LOG_DIR ] && mkdir $LE_LOG_DIR +echo "$DATE" >> $LE_LOG_DIR/postfix.log + +echo "Reload the postfix service" >> $LE_LOG_DIR/postfix.log +if [ -x /bin/systemctl ] ; then + systemctl reload postfix >> $LE_LOG_DIR/postfix.log 2>&1 +else + service postfix reload >> $LE_LOG_DIR/postfix.log 2>&1 +fi + +echo "Done." >> $LE_LOG_DIR/postfix.log + +exit 0 \ No newline at end of file diff --git a/library/roles/postfix/templates/postfix-nrpe.cfg.j2 b/library/roles/postfix/templates/postfix-nrpe.cfg.j2 new file mode 100644 index 00000000..65d2fdcd --- /dev/null +++ b/library/roles/postfix/templates/postfix-nrpe.cfg.j2 @@ -0,0 +1,4 @@ +# Postfix mailq +command[postfix_check_mailqueue]=/usr/bin/sudo {{ nagios_plugins_dir }}/check_postfix_mailqueue -w {{ nagios_postfix_mailq_w }} -c {{ nagios_postfix_mailq_c }} +# Postfix processed +command[postfix_check_processed]=/usr/bin/sudo {{ nagios_plugins_dir }}/check_postfix_processed -w {{ nagios_postfix_processed_w }} -c {{ nagios_postfix_processed_c }} diff --git a/library/roles/postfix/templates/sasl_passwd.j2 b/library/roles/postfix/templates/sasl_passwd.j2 new file mode 100644 index 00000000..446cc249 --- /dev/null +++ b/library/roles/postfix/templates/sasl_passwd.j2 @@ -0,0 +1 @@ +{{ postfix_relay_host }}:{{ postfix_relay_port }} {{ postfix_smtp_relay_user }}:{{ postfix_smtp_relay_pwd }}