ansible-role-postfix/templates/main.cf.j2

878 lines
34 KiB
Django/Jinja

{% if postfix_delivery_soft_bounce %}
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
soft_bounce = yes
{% else %}
soft_bounce = no
{% endif %}
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
{% if ansible_distribution_file_variety == "RedHat" %}
daemon_directory = /usr/libexec/postfix
{% endif %}
data_directory = /var/lib/postfix
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
myhostname = {{ ansible_fqdn }}
{% if postfix_use_domain_name %}
mydomain = {% if domain_name is defined %}{{ domain_name }}{% else %}{{ ansible_fqdn }}{% endif %}
{% else %}
mydomain = {{ ansible_fqdn }}
{% endif %}
# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
{% if postfix_use_domain_name %}
myorigin = {% if domain_name is defined %}{{ domain_name }}{% else %}{{ ansible_fqdn }}{% endif %}
{% else %}
myorigin = {{ ansible_fqdn }}
{% endif %}
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
{% if postfix_use_inet_interfaces %}
{% if not postfix_smtpd_server %}
inet_interfaces = localhost
inet_protocols = ipv4
{% else %}
inet_interfaces = {% for int in postfix_inet_interfaces %}{{ int }}{% if not loop.last %}, {% endif %}{% endfor %}
inet_protocols = {% for proto in postfix_inet_protocols %}{{ proto }}{% if not loop.last %}, {% endif %}{% endfor %}
{% endif %}
{% endif %}
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
{% if postfix_proxy_interfaces_enabled %}
proxy_interfaces = {% for proxy_int in postfix_proxy_interfaces %}{{ proxy_int }} {% endfor %}
{% endif %}
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
{% if postfix_use_domain_name %}
mydestination = {{ ansible_fqdn }}, localhost, {% if domain_name is defined %}{{ domain_name }}{% endif %}
{% else %}
mydestination = {% if postfix_local_recipients %}{{ ansible_fqdn }},{% endif %} localhost
{% endif %}
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
{% if postfix_virtual_transport_enabled %}
local_recipient_maps =
{% elif not postfix_local_recipients %}
#local_recipient_maps =
{% endif %}
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
{% if postfix_delivery_soft_bounce %}
unknown_local_recipient_reject_code = 450
{% else %}
unknown_local_recipient_reject_code = 550
{% endif %}
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
{% if not postfix_use_inet_interfaces %}
mynetworks = 127.0.0.0/8
{% else %}
mynetworks = {{ postfix_mynetworks }}
{% endif %}
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
{% if postfix_use_relay_host %}
relayhost = {{ postfix_relay_host }}:{{ postfix_relay_port }}
{% endif %}
# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s
# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.
{% if postfix_transport_map_enabled %}
transport_maps = {% for tmap in postfix_transport_maps %}{{ tmap }}{% if not loop.last %}, {% endif %}{% endfor %}
{% endif %}
# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
alias_maps = {% for alias in postfix_alias_maps %}{{ alias }}{% if not loop.last %}, {% endif %}{% endfor %}
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
alias_database = {% for dbalias in postfix_alias_databases %}{{ dbalias }}{% if not loop.last %}, {% endif %}{% endfor %}
# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
recipient_delimiter = {{ postfix_recipient_delimiter }}
# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
# server using LMTP (Local Mail Transport Protocol), this is prefered
# over the older cyrus deliver program by setting the
# mailbox_transport as below:
#
# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#
# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
# these settings.
#
# local_destination_recipient_limit = 300
# local_destination_concurrency_limit = 5
#
# Of course you should adjust these settings as appropriate for the
# capacity of the hardware you are using. The recipient limit setting
# can be used to take advantage of the single instance message store
# capability of Cyrus. The concurrency limit can be used to control
# how many simultaneous LMTP sessions will be permitted to the Cyrus
# message store.
#
# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#fallback_transport =
{% if postfix_virtual_transport_enabled %}
virtual_transport = {{ postfix_virtual_transport_protocol }}:{{ postfix_lmtp_protocol }}:{{ postfix_lmtp_host }}:{{ postfix_lmtp_port }}
virtual_mailbox_domains = {{ postfix_virtual_mailbox_domains }}
virtual_mailbox_maps = {% for mbmap in postfix_virtual_mailbox_maps %}{{ mbmap }} {% endfor %}
{% endif %}
{% if postfix_virtual_domains %}
virtual_alias_domains = {{ postfix_virtual_alias_domains }}
{% endif %}
{% if postfix_virtual_addresses %}
virtual_alias_maps = {% for mbmap in postfix_virtual_alias_maps %}{{ mbmap }} {% endfor %}
virtual_mailbox_limit = {{ postfix_message_size_limit }}
{% endif %}
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks
#
# UCE/RBL
#
disable_vrfy_command = {{ postfix_smtp_disable_vrfy }}
smtpd_delay_reject = {{ postfix_smtp_delay_reject }}
smtpd_helo_required = {{ postfix_smtp_helo_required }}
mailbox_size_limit = {{ postfix_message_size_limit }}
message_size_limit = {{ postfix_message_size_limit }}
{% if postfix_use_milter %}
#
# MILTER CONFIGURATION
#
# clamav, milter-greylist, spamassassin
#
#milter_connect_timeout = {{ postfix_milter_connect_timeout }}
#milter_command_timeout = {{ postfix_milter_command_timeout }}
#milter_content_timeout = {{ postfix_milter_content_timeout }}
# The default is 6
#milter_protocol = 6
{% if postfix_spamassassin_milter %}
# spamassassin wants _
milter_connect_macros = j {daemon_name} v _
{% endif %}
# What to do in case of errors? Specify accept, reject, tempfail,
# or quarantine (Postfix 2.6 or later).
milter_default_action = {{ postfix_milter_action }}
smtpd_milters =
{% if postfix_clamav_milter %}
{{ postfix_clamav_milter_socket }}
{% endif %}
{% if postfix_spamassassin_milter %}
{{ postfix_spamassassin_milter_socket }}
{% endif %}
{% endif %}
{% if postfix_smtpd_server %}
{% if postfix_helo_restrictions %}
smtpd_helo_restrictions =
permit_mynetworks
reject_invalid_helo_hostname
reject_non_fqdn_helo_hostname
reject_unknown_helo_hostname
{% endif %}
smtpd_recipient_restrictions =
{% for recipient_rule in postfix_smtpd_server_restrictions %}
{{ recipient_rule }}
{% endfor %}
{% if postfix_spf_policy_install %}
check_policy_service unix:private/policyd-spf
{% endif %}
{% if postfix_spamhaus_dbl_enabled %}
reject_rhsbl_helo dbl.spamhaus.org
reject_rhsbl_reverse_client dbl.spamhaus.org
reject_rhsbl_sender dbl.spamhaus.org
{% endif %}
{% if postfix_rbl_enabled %}
reject_rbl_client {{ postfix_rbl_list }}
{% endif %}
smtpd_client_restrictions =
permit_mynetworks
permit_inet_interfaces
{% if postfix_submission_server %}
permit_sasl_authenticated
{% endif %}
{% if postfix_mx_server %}
{% for client_rule in postfix_smtpd_mx_client_restrictions %}
{{ client_rule }}
{% endfor %}
{% if postfix_spamhaus_dbl_enabled %}
reject_rhsbl_helo dbl.spamhaus.org
reject_rhsbl_reverse_client dbl.spamhaus.org
reject_rhsbl_sender dbl.spamhaus.org
{% endif %}
{% if postfix_rbl_enabled %}
reject_rbl_client {{ postfix_rbl_list }}
{% endif %}
{% endif %}
{% if postfix_mx_server %}
permit
{% else %}
reject
{% endif %}
{% if postfix_submission_server %}
smtpd_sasl_path = smtpd
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = {{ postfix_smtp_sasl_security_options }}
smtpd_sasl_tls_security_options = {{ postfix_smtp_sasl_tls_security_options }}
smtpd_sasl_authenticated_header = yes
broken_sasl_auth_clients = yes
# Block clients that speak too early.
smtpd_data_restrictions = reject_unauth_pipelining
{% endif %}
{% if postfix_reject_sender_login_mismatch %}
smtpd_sender_login_maps =
{% for login_map in postfix_smtpd_sender_login_maps %}
{{ login_map }}
{% endfor %}
{% endif %}
{% if postfix_smtpd_reject_unknown_helo_hostname %}
# Don't talk to mail systems that don't know their own hostname. Use with care: it breaks most dialup setups
smtpd_helo_restrictions = reject_unknown_helo_hostname
{% endif %}
{% if postfix_smtpd_sender_restrictions %}
# Do not accept everything
smtpd_sender_restrictions =
{% if postfix_reject_unknown_sender_domain %}
reject_unknown_sender_domain
reject_non_fqdn_sender
{% endif %}
{% if postfix_reject_sender_login_mismatch %}
reject_sender_login_mismatch
{% endif %}
{% for rule in postfix_smtpd_additional_sender_restrictions %}
{{ rule }}
{% endfor %}
{% endif %}
{% if postfix_submission_server %}
# Relay control: local clients and
# authenticated clients may specify any destination domain.
smtpd_relay_restrictions =
permit_sasl_authenticated
reject
{% endif %}
{% if postfix_behind_haproxy %}
smtpd_upstream_proxy_protocol = haproxy
{% endif %}
{% endif %}
{% if postfix_add_missing_headers %}
local_header_rewrite_clients =
permit_inet_interfaces
{% if postfix_submission_server %}
permit_sasl_authenticated
{% endif %}
always_add_missing_headers = yes
{% endif %}
# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains
# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
smtpd_banner = $myhostname ESMTP $mail_name
# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
local_destination_concurrency_limit = {{ postfix_local_dest_concurrency_limit }}
default_destination_concurrency_limit = {{ postfix_default_destination_concurrency_limit }}
# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
#debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
# ddd $daemon_directory/$process_name $process_id & sleep 5
# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
# -dmS $process_name gdb $daemon_directory/$process_name
# $process_id & sleep 1
# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail.postfix
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases.postfix
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq.postfix
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = postdrop
# html_directory: The location of the Postfix HTML documentation.
#
html_directory = no
# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man
# readme_directory: The location of the Postfix README files.
#
readme_directory = no
# TLS parameters
{% if letsencrypt_acme_install is defined %}
{% if postfix_use_letsencrypt %}
smtpd_tls_CAfile={{ letsencrypt_acme_certs_dir }}/fullchain
smtpd_tls_cert_file={{ letsencrypt_acme_certs_dir }}/fullchain
smtpd_tls_key_file={{ letsencrypt_acme_certs_dir }}/privkey
{% else %}
smtpd_tls_CAfile=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
{% endif %}
{% endif %}
{% if letsencrypt_acme_install is not defined %}
smtpd_tls_CAfile=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
{% endif %}
{% if postfix_tls_encryption_level == 'intermediate' %}
# 2019-12-11, https://ssl-config.mozilla.org/#server=postfix&server-version=2.10.1&config=intermediate&openssl-version=1.0.2k
smtpd_use_tls = yes
smtpd_tls_security_level = {{ postfix_smtpd_tls_security_level }}
{% if postfix_smtpd_server %}
smtpd_tls_auth_only = yes
{% endif %}
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
smtpd_tls_mandatory_ciphers = medium
# curl https://ssl-config.mozilla.org/ffdhe2048.txt > /path/to/dhparam.pem
# not actually 1024 bits, this applies to all DHE >= 1024 bits
smtpd_tls_dh1024_param_file = {{ postfix_tls_dhparam_file }}
tls_medium_cipherlist = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
tls_preempt_cipherlist = no
{% elif postfix_tls_encryption_level == 'old' %}
# 2019-12-11, https://ssl-config.mozilla.org/#server=postfix&server-version=2.10.1&config=old&openssl-version=1.0.2k
smtpd_use_tls = yes
smtpd_tls_security_level = {{ postfix_smtpd_tls_security_level }}
{% if postfix_smtpd_server %}
smtpd_tls_auth_only = yes
{% endif %}
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
smtpd_tls_protocols = !SSLv2, !SSLv3
smtpd_tls_mandatory_ciphers = medium
# openssl dhparam 1024 > /path/to/dhparam.pem
# not actually 1024 bits, this applies to all DHE >= 1024 bits
smtpd_tls_dh1024_param_file = {{ postfix_tls_dhparam_file }}
tls_medium_cipherlist = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA
tls_preempt_cipherlist = yes
{% endif %}
# Server
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
# Client
smtp_tls_security_level = {{ postfix_smtp_tls_security_level }}
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
{% if ansible_distribution_file_variety == "Debian" %}
{% if ansible_distribution_version is version_compare('18.04', '>=') %}
compatibility_level=2
{% endif %}
{% endif %}